Lockstitch GT-280


Single Needle Lockstitch Machine with Needle Feed, Full Automatic

KRAFT BML-9960-D4 is a computer industrial sewing machine with needle feed transport. With this kind of transport, the material moves along with the needle, only after the puncture of all layers of fabrics. Automatic feature: thread trimmer, presser foot lift and bartacking.

The smooth start function allows for a smooth start of the stitch with a gradual increase in sewing speed. To do this, on the control panel, you must specify the number of initial stitches that will be performed at minimum engine speed. The number of stitches can be set from 1 to 50. Starting speed – from 200 to 1 500 stiches/min.


  • Built-in control panel
  • Double feed
  • Energy saving servo motor (Built in machine)
  • Built-in LED light
  • Built-in needle positioner
  • Built-in spooler
  • Automatic oil pump
  • Smooth start function
  • Automatic thread trimming
  • Automatic bartacking
  • Automatic foot lifter

Stitch adding

There is a function button for adding one stitch in the needle guide area. This option will be useful during the rotation at the corners of the products and fine-tuning of the line in the joint.

Built-in servo motor

KRAFT BML-9960-D4 is equipped with energy efficient servo-motor built-in from famous Taiwanese Ho-Hsing. Revolutions from the engine are transmitted directly to the main shaft, without a clutch or belt. Cooler significantly reduces the temperature of the engine and control unit.

Integrated panel

KRAFT BML-9960-D4 is equipped with an innovative control panel, which is conveniently located above the sewing platform, in the contact and visual areas of the machine operator. That solution allows you to change the parameters of sewing much easier.

LED light

Built-in LED-illumination is practically placed directly above the needle, providing excellent illumination of the entire working area of the bag platform. Available brightness adjustment of the lighting in two positions.

Built-In Spooler

The device for winding is built into the head of the sewing machine, allowing you to carry out preparatory work on winding the thread on the bobbin as quickly as possible.

Technical Data

BML-9960-D4 DBx1 0-5 5.5-13 5000 625x250x550 33/38